​

Sticky version of Solitex Plus, for external wrapping of timber frame building. Highly diffusion permeable/breathable and weather resistant, but with resistance to driving rain (10,000mm). UV tolerant (3 months exposure). Uses Pro Clima acrylic glue.
1.5m x 30m

Highly diffusion permeable, with maximum resistance to driving rain. For use with open & closed façades, with up to 35mm gap. Designed to maximise ability for drying of wall structure. Tested for up to 6 months UV/ outdoor exposure.

1.5m x 50m

Flame retardant wall lining membrane for gap decking up to 30 mm (1 1/4″), with self-adhesive zones.

1.5m x 50m

Vapour check / airtight membrane for intelligent vapour diffusion. Paper-based, for those wanting a more ecological solution. Delicate to install.

1.3m x 50m

Airtight vapour control membrane

A roll of Constivap 1.5m wide x 50m long.

Robust Pro Clima vapour check (diffusion closed). Suitable for areas with heavy wear & tear.

1.5m x 50m

Pro Clima flexible corner sealing tape for window/door sealing, with split back strips (12mm/ 48mm split).

Tape width 60mm x length 30m.

Pro Clima airtightness tape. A stretchy version of the Pro Clima Tescon Vana and Tescon Profil tapes, useful for awkward joins or uneven surfaces.

Width 60mm x Length 30m

Pro Clima paper-based value tape. Not stretchy but uses Pro Clima acrylic glue. Internal use only.

Width 60mm x Length 30m

Pro Clima double-sided rubber tape, for nail sealing with Solitex Plus. Does not use the same glue as other Pro Clima Tescon tapes but is useful to maintain airtightness when membrane nail fixings may be pulled by building activity or wind/ rain.

A roll of Tescon Naideck tape is 50mm wide and 20m long.

Pro Clima multi-purpose adhesive, permanently elastic. High adhesion and quick drying. Very low VOC rating.

Pro Clima multi-purpose adhesive, permanently elastic. High adhesion and quick drying. Very low VOC rating.

Roll of Pro Clima Orcon F joint adhesive as a bead, with peel-off strip.

Pro Clima product to remove Pro Clima Orcon F adhesive and Pro Clima tape adhesive when still tacky. Also removes oil spots, tar and shoe polish.

Pro Clima natural latex adhesive for use in conjunction with the paper-based DB+ membrane.

Butyl highly elastic and sticky tape for watertight and airtight seals, including around pipes.

Width 60mm x Length 10m

Highly vapour permeable and robust roof underlay with exceptional weather tightness in all conditions. Closed cell technology ensures breathability is maintained in extreme wet and cold conditions, where microporous membranes can fail.

1.5m x 15 or 50m

Vapour permeable fully windtight breather membrane, designed as a wall lining membrane for timber frame structures. Also ideal for use as an airtight breathable membrane when insulating a suspended timber floor (install on the cold side/ underneath the insulation).

1.5 or 3m width x50m length

Robust vapour check/ internal airtight membrane, with intelligent vapour diffusion. Maximum protection against moisture damage. Widely used in timber frame buildings. Available in 1.5m or 3m widths.